yageo corporation leaded resistors metal film resistors mfr series normal & miniature style features po w er rating 1/6w, 1/4w, 1/2w, 1w, 2w resistance tolerance 0.1%, 0.25%, 0.5%, 1% t.c.r. 15ppm/?, 25ppm/?, 50ppm/?, 100ppm/? dimensions style dimension normal miniature l ? h d mfr-12 mfr25s 3.3 0.4 1.8 0.3 28 2.0 0.5 0.05 mfr-25 mfr50s 6.3 0.5 2.3 0.3 28 2.0 0.6 0.05 mfr-50 mfr1ws 9.0 0.5 3.2 0.5 26 2.0 0.6 0.05 mfr100 mfr2ws 11.5 1.0 4.5 0.5 35 2.0 0.8 0.05 mfr200 15.5 1.0 5.0 0.5 33 2.0 0.8 0.05 unit : mm introduction the mfr series metal film resistors are manufactured using vacuum sputtering system to deposit multiple layers of mixed metals and passivative materials onto a carefully treated high grade ceramic substrate, the resistors are coated with layers of blue lacquer. ?d h l ?d derating curve ambient temperature (oc) rated load (%) hot-spot temperature surface temp. rise (oc) applied load, % of rcwv mfr2ws mfr200 mfr1ws mfr100 mfr50s mfr-50 mfr25s mfr-25 mfr-12 025507 5 100 200 150 100 50 measuring position 100 80 60 40 20 20 40 60 80 100 120 140 160 180 70oc
note : electrical characteristics style mfr-12 mfr25s mfr-25 mfr50s mfr-50 mfr1ws mfr100 mfr2ws mfr200 po w er rating at 70? 1/6w 1/4w 1/2w 1w 2w operating temp. range -55? to +155? maximum working voltage 200v 200v 250v 300v 350v 400v 500v 500v 500v maximum overload voltage 400v 400v 500v 600v 700v 800v 1000v 1000v 1000v dielectric withstanding voltage 300v 400v 500v 500v 500v 700v 1000v 1000v 1000v v alue range 0.5%, 1% 10 ? ~1m ? v alue rang 0.1%, 0.25% 100 ? ~100k ? t emperature coefficient (by type) 15ppm/?, 25ppm/?, 50ppm/?, 100ppm/? * resistance range for standard resistance, below or over this resistance on request. 2 environmental characteristics performance test test method appraise short time overload jis-c-5202 5.5 2.5 times rcw v for 5 seconds (0.25%+0.05 ? ) dielectric withstanding voltage jis-c-5202 5.7 in v-block for 60 seconds by type t emperature coefficient of resistance jis-c-5202 5.2 -55? to +155? by type insulation resistance jis-c-5202 5.6 in v-block >10000m ? solderability jis-c-5202 6.5 235? for 5 0.5 seconds 95% min. coverage resistance to solvent jis-c-5202 6.9 trichroethane for 1 min. with ultrasonic no deterioration of coatings and markings te r minal strength direct load for 10 sec. in the direction of the terminal leads 2.5kg (24.5n) pulse overload jis-c-5202 5.8 4 times rcw v 10000 cycles (1 sec. on , 25 sec. off) (2%+0.05 ? ) load life in humidity jis-c-5202 7.9 40 2?, 90~95% rh at rcw v for 1000 hrs. (1.5%+0.05 ? ) (1.5 hrs. on , 0.5 hrs. off ) load life jis-c-5202 7.10 70? at rcw v for 1000 hrs. (1.5 hrs. on , 0.5 hrs. off) (1.5%+0.05 ? ) t emperature cycling jis-c-5202 7.4 -55 c ? room temp. ? +155 c ? room temp. for 5 cycles (0.25%+0.05 ? ) resistance to soldering heat jis-c-5202 6.4 350? 10? for 3 0.5 seconds (0.25%+0.05 ? ) * rated continuous working voltage (rcw v)= power rating x resistance value
|
